Skip to content Skip to navigation
    Subtotal: tax and shipping not included
    proceed to checkout

    Empty Cart

    Renfert die:master

    Systematic die preparation

    The die:master system provides you with perfect die preparation as a working basis for conventional and all-ceramic restorations.

    die:master set
    Fast and clear access to all system components due to the set stand.

    • A high degree of working comfort due to the integrated isolating brush with magnetic fixture
    • Integrated, practical die holder in the stand.

    die:master duo
    Stone hardener and sealant
    In-depth hardness and high edge-strength due to powerfully cross-linked die stone structure.

    • Maximum bond strength due to chemical bond to die spacer layer
    • 100% dimensionally-stable die due to 0µm layer thickness

    die:master grey, red, blue, silver, gold varnishes
    Durable die varnishes with three layer thicknesses

    (13, 15 and 20 μm).

    • Extremely resistant to steam and scratches due to a highly cross-linked varnish structure
    • Maximum bond between varnish and hardener due to the primer technology
    • No pools of varnish on the brush or die and a high level of edge stability due to extremely thixotropic flowing characteristics

    die:master thinner
    For dilution and modification of the die:master varnishes.

    • Permanent preservation of layer thickness and varnish quality
    • Controlled viscosity adjustment due to accurate droplet dosing

    picosep Wax Isolation
    Solvent-free, silicone-based plaster against wax isolation.

    • No corrosion of varnishes and waxes due to specific coordination of isolating agent with the die:master components.
    • No evaporation of the isolating agent due to alcohol-free formula

    die:master ivory & die:master aqua
    Tooth coloured and removable die varnishes specially for all-ceramic restorations, such as press ceramics made from lithium disilicate (LS2).

    die:master ivory – All-ceramic (A2/B2)
    Extremely resistant tooth-coloured die varnish.

    • Highly aesthetical effect and no colour irritation during the production process due to harmonious colour coordination
    • Minimal dimensional increase of only 10 μm per coat
    • Extremely high vapour and scratch resistance due to a highly cross-linked varnish structure

    die:master aqua – Press ceramic (A1/B1)
    Resistant die varnish during the wax-up but also easy to wash off with water.

    • Easy handling due to high opacity
    • Optimal expansion compensation with a layer thickness of 10 μm per coat of varnish

    For more information on Renfert die:master, visit www.renfert.com or contact us on 0508 486 252.