Skip to content Skip to navigation
    Subtotal: tax and shipping not included
    proceed to checkout

    Empty Cart

    IPS e.max CAD for CEREC MO A14 (L) / 5

    Product Number: #B601192
    0 644362
    1 644363
    2 644364
    3 644365
    4 644366

    IPS e.max CAD for CEREC MO A14 (L) / 5

    IPS e.max CAD is the world's best-selling glass-ceramic1. It is suitable for the efficient fabrication of full-contour restorations and it is known for its versatile application options, comprehensive range of indications and for its high strength of 530 MPa2.

    Both its aesthetic properties and durability have been confirmed in everyday clinical practice. As a result, the material can be used to fashion full-contour crowns of only 1mm thickness, which are subsequently seated with the adhesive technique.

    Comprehensive range of indications
    A wide variety of restorations can be produced with these materials – from thin veneers to three-unit bridges (up to the second premolar as the terminal abutment). High aesthetic standards are fulfilled due to the four different levels of translucency of the A-D shades and the special Bleach and Impulse shades.

    The IPS e.max CAD range comprises blocks that come with a prefabricated connection for the direct cementation to Viteo Base. The adhesive titanium base is coordinated with a variety of implant systems. This allows implant-supported hybrid abutments and hybrid abutment crowns to be created at chairside using clinically proven products. Cementation is achieved with the self-curing Multilink Hybrid Abutment luting composite.

    IPS e.max CAD MO (Medium Opacity) - The classical block
    Given their particular opacity, MO blocks are ideally suitable for the fabrication of frameworks on slightly discoloured preparations. They are primarily used in the dental laboratory.

    Indications

    • Minimally invasive crowns (≥ 1.0mm)3
    • Crowns
    • Three-unit bridges (up to the second premolar as the terminal abutment)
    • Implant-supported hybrid restorations (hybrid abutments, hybrid abutment crowns)
    • Veneers, thin veneers (0.4mm) and occlusal veneers
    • Inlays, onlays, partial crowns

    Benefits

    • Excellent aesthetics and high strength of 530 MPa2, efficiently obtained in the dental practice
    • Full range of indications for your chairside CAD/CAM system
    • Minimally invasive crown preparation; adhesive cementation
    • Clinical long-term success and scientifically documented results

    1 Based on sales figures
    2 Average biaxial flexural strength, over a period of 10 years, R&D Ivoclar Vivadent, Schaan, Liechtenstein
    3 On the basis of long-term clinical evidence and the material's high strength, the fabrication of crowns with a minimum thickness of 1mm is permissible if an adhesive cementation technique is used.

    No reviews on this product available. Be the first to write a review!